Plastering in Swansea.

Plastering for Swansea homes

At the 2021 Census, 68% of the 2,212 occupied homes in Swansea were separate houses, 9% were semi-detached houses, terraces or townhouses and 22% were flats or apartments. With houses and townhouses side by side, the work is a mix of crack repairs, new linings for renovations and repairs to shared and upstairs ceilings.

Plastering needs for diverse home types

The mix of housing in this area creates a wide range of interior surface needs. With 68% of the 2,212 occupied homes being separate houses, many properties require traditional wall repairs or updated cornices. These detached dwellings often face movement in the frame that leads to hairline cracks in the plasterboard joints over time.

The presence of flats and townhouses introduces different requirements, such as sound management between units. When walls are shared, the choice of lining can affect how much noise travels between homes. We provide sheeting and setting for these multi-residential layouts to ensure a clean finish across all internal surfaces.

Preparing walls for a property transfer

When preparing a home for sale or a new lease, small imperfections in the walls become more noticeable. Holes from old picture hooks, scuffs from furniture, and cracks in the corners can detract from the overall look of a room. Patching these areas ensures the surface is flat and ready for a fresh coat of paint.

The process involves removing loose plaster, filling the void, and sanding the area until it is flush with the existing wall. For larger holes, a small piece of plasterboard is inserted and taped. This prevents the patch from cracking again once the paint is applied and the home is occupied.

Managing moisture damage from upper floors

In flats and apartments, a leak from a bathroom or kitchen in the unit above often manifests as a brown stain or bubbling paint on the ceiling. If the plasterboard remains damp, it can lose its structural integrity and begin to sag or crumble, which requires the affected section to be cut out.

Once the leak is stopped, the damaged area is removed and replaced with new sheeting. We then tape and joint the new section to the old ceiling. This ensures the repair is not visible after painting and that the ceiling is once again safe and level across the entire room.

Installing VJ panelling in mixed residential spaces

Adding VJ panelling is a common choice for homeowners wanting to change the look of a hallway or bedroom. This involves installing vertical grooves that provide a traditional feel. It is often used to cover older walls that are difficult to repair or to add a decorative element to a plain room.

The installation requires precise alignment to ensure the lines are straight from floor to ceiling. We handle the sheeting and finishing of the panelling to create a consistent surface. This option works well in both separate houses and townhouses to define a space without the need for full wall relining.

Addressing shared wall movements

Homes that share a common wall, such as semi-detached houses or terraces, can experience different settling patterns. This often results in vertical cracks appearing where the plasterboard meets the internal frame or at the junctions of the ceiling and walls.

Fixing these issues involves more than just filling the gap. The area is usually raked out, taped and set with jointing compound so the joint is reinforced against slight movement. This method reduces the chance of the crack reappearing in the same spot after the walls have been finished.